EDI设备
  RO膜原件
  过滤系统
  中水回用系统
  软化设备
  纯水设备

联系人:陈先生

电话:0512-66717525

传真:0512-67565920

手机:151-9005-0560(微信号)

邮箱:1148796974@qq.com


  当前位置:首 页 > 产品中心

 纯水设备 >> 纯水耗材 >> 核级抛光树脂
 
  
产品编号:
AMBERJET™
产品名称:
核级抛光树脂
规  格:
AMBERJET™UP6150
产品备注:
超纯水系统抛光树脂
产品类别:
纯水设备
 
   产 品 说 明

 Ion Exchange Resins

PRODUCT DATA SHEET

AMBERJET™ UP6150

Polishing Mixed Bed Resin for High Purity Applications

AMBERJET UP6150 resin is a fully regenerated mixed bed of cation and anion exchange resins intended for use in high purity water systems after reverse osmosis. In properly designed ultrapure water systems, Amberjet UP6150 resin will deliver 18 Megohm·cm quality water with total organic carbon levels well below 5 ppb on its first operating cycle as a polishing mixed bed.  This mixed bed product is particularly suitable for use in the polishing of high purity water for specialty electronics applications such as the manufacturing of disk drives, display devices, CD-ROMs, discrete semiconductor devices, lower density IC chips, or in the back-end chip dicing and mounting operations. Because of its high level of regeneration Amberjet UP6150 resin is also suited for any general purpose mixed bed applications for the economical production of high purity water. The component resins of AMBERJET UP6150 resin are uniform particle size Amberjet resins, and their size was selected to provide excellent first cycle mixed bed performance, while at the same time allowing for future separation and regeneration of the resins. The resins are mixed to give a stoichiometric equivalent of cation and anion exchange capacity, and the resin mixture exhibits no clumping. The uniform particle size of the resins maximizes kinetic performance in the service cycle of the mixed bed, while still allowing for later separation and regeneration.  All these characteristics are essential to produce high purity water with a minimum volume of rinsing.

 BASIC RESIN PROPERTIES

For high purity regenerated mixed beds, UPW performance is much more significant than basic resin properties.  It is still important to know that the resins used in the application are of the highest quality.  The typical properties of the resins used in AMBERJET UP6150 resin are shown below. 

These values are listed to show that both the cation and anion resins used to make AMBERJET UP6150 resin meet the standards for high capacity, uniform particle size ion exchange resins.

                                                                        Cation H +                         Anion OH –

 Total exchange capacity, eq/L ________________  ≥ 1.80                               ≥ 1.00

 Moisture holding capacity, % _________________  44.0 - 54.0                        54.0 - 66.0

 Particle size

       Uniformity coefficient ____________________   ≤ 1.20                             ≤ 1.25

       Harmonic mean size______________________    0.58 to 0.68 mm           0.58 to 0.68 mm 

H form      % of sites ________________________     ≥ 99                             -

OH form    % of sites ________________________       -                               ≥ 95  

Cl form,    % of sites ________________________        -                              ≤ 0.5

CO3 form   % of sites ________________________       -                               ≤5.0

SO4 form   % of sites _______________________          -                              ≤ 0.1

SUGGESTED OPERATING CONDITIONS  

 (Product may be operated successfully outside these conditions, but results may not be optimum

 Feed water temperature______________________           15 to 25°C (60 to 77°F)

 Minimum bed depth ________________________             900 mm  (3 feet)

 Service flow rate (working mixed bed) _________             20 to 30 BV*/h

 Service flow rate (polishing mixed bed) ________             30 to 40 BV/h

 Recommended influent water quality 
for polishing mixed bed application

 Inlet Resistivity ____________________________             > 16 MΩ·cm

 Inlet Silica________________________________              < 5 ppb

 Inlet Total Organic Carbon _________________                 < 20 ppb

 * 1 BV (Bed Volume) = 1 m3 solution per m3 resin  (1BV/h = 0.125 gpm/ft3)

 QUALITY ASSURANCE:

 AMBERJET UP6150 resin is tested by Rohm and Haas for resistivity, total organic carbon, and kinetic performance and will meet stringent UPW performance requirements on these most critical parameters. Rohm and Haas will fully support the quality and performance of AMBERJET UP6150 resin in UPW applications in order to assure full customer satisfaction with the product as delivered. Typical TOC and resistivity curves based on our quality control procedure for Amberjet UP6150 resin are shown below.

 

点击数:598  录入时间:2019-10-28 【打印此页】 【关闭

友情链接:  商务联盟   工信部网站   顺企网商铺   网络114   马可波罗采购搜索引擎   114啦网址导航   谷瀑环保设备网   膜工业协会首页   360导航   中国水处理网   商国互联网   阿里巴巴网   西门子EDI膜块网   美国通过(GE)网   美国纳尔科网   工信部网   中国环保网   美国海德能首页   美国陶氏化学公司   天津膜天膜科技官网   北京蓝星东丽官网   百度网  

我们致力于:工业水处理设备的设计制造和工程建设以及系统维护。
代销产品:美国陶氏(DOW)反渗透膜和树脂、美国海德能HYDRANAUTICS RO膜元件、东丽Toray反渗透膜元件、罗门哈斯Rohm Haas树脂、西门子SIEMENS(IONPURE) EDI膜块、通用GE EDI膜块、GF仪器及各类水处理材料。

苏ICP备1340106号-2 技术支持:苏州西尔环保官网